[cisco-voip] CCME Speed Dials and COR

[Paul Choi]

I see one way of blocking LD dialing while allowing
XML speeddials would be to use outbound translation
patterns. This might be very kludgy but you could be
very specific on your dial-peers of which 32 numbers
you'd like to permit system-wide.

After glancing at the CCME documentation, I do not see
any FAC support unfortunately.

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> Got a customer, wants to block all LD dialing,
> unless it is a speed-dial in
> an XML for CCME...
> 
> How do we do that?
> 
> Also, he wants to implement Facility Access Codes so
> that users can be
> prompted to dial a digit string to dial LD...
> 
> Any way to do that on CCME?
> 
> 
> 
> 
> Jonathan
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
____________________________________________________________________________________
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.
http://mobile.yahoo.com/mail