[cisco-voip] CUE Browse???

[Paul Choi]

Please post your CUE-related configuration on the
gateway side.

interface service-module <#/#> ....
....

It sounds like you're simply pointing towards the
primary data address of CUE instead of the service
module's interface.

I usually have CCME's IP address pointed towards
10.x.x.1 and CUE as 10.x.x.2. These private addresses
could be changed according to the size of your IPTel
network of course.

Can you ping the service-module IP address from your
computer?

Did you set the default gateway for the service
module?

Did you set a static route to the service-engine's IP
address?

If your answer to any of these questions is, "No."
then you have your answer why you're not able to
configure CUE from the GUI. The fact that you're just
getting SDM leads me to believe you're not using the
right address.

--- Zevier Thoran <zthoran at yahoo.com> wrote:

> Hi,
> How can I browse to Cisco Unity Express? If I type
> http://ip_addr_of_CUE, then all I get is the Cisco
> Router SDM.
> Please help.
> Thanks
> -Zevier
> 
> 
> 
> 
>  
>
____________________________________________________________________________________
> Finding fabulous fares is fun.  
> Let Yahoo! FareChase search your favorite travel
> sites to find flight and hotel bargains.
> http://farechase.yahoo.com/promo-generic-14795097>
_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
____________________________________________________________________________________
The fish are biting. 
Get more visitors on your site using Yahoo! Search Marketing.
http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php