[cisco-voip] CUE Browse???

[Jonathan Charles]

You should have a sip dial-peer pointing at the CUE, that is the IP address
you should be going to...

So, here's what you need to do.

First, determine an IP to give the CUE.

Do so by specifying that IP address under the service-module for the CUE:

interface Service-Engine0/0
 ip unnumbered FastEthernet0/0.3
 service-module ip address 10.0.0.2 255.255.255.0
 service-module ip default-gateway 10.0.0.1
 hold-queue 60 out

Create a sip dial-peer for the CUE:

Ex:

dial-peer voice 5000 voip
 description CUE
 destination-pattern 5000
 session protocol sipv2
 session target ipv4:10.0.0.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad


Then, you should be able to open a web browser to 10.0.0.2 and bring up the
CUE web page.



Jonathan

On 3/17/07, Zevier Thoran <zthoran at yahoo.com> wrote:
>
> Hi,
> How can I browse to Cisco Unity Express? If I type http://ip_addr_of_CUE,
> then all I get is the Cisco Router SDM.
> Please help.
> Thanks
> -Zevier
>
> ------------------------------
> 8:00? 8:25? 8:40? Find a flick in no time
> with theYahoo! Search movie showtime shortcut.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070318/5a21b51b/attachment.html