[cisco-voip] Troubleshooting WS-X6608-T1 on Cat 6509 CATOS

[Lelio Fulgenzi]

Have you tried the (Dick) Tracy Tool?

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a00803df803.shtml

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Dane 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, March 19, 2007 10:04 AM
  Subject: [cisco-voip] Troubleshooting WS-X6608-T1 on Cat 6509 CATOS


  I am familiar with various voice troubleshooting techniques and
  commands with regards to PRIs on IOS gateways such as say a 3845 with
  IOS and two port T1/PRI card.

  I can do stuff like debug isdn q931, sh voice port and sh voice call
  and stuff like that.

  But I can't seem to find similiar commands for CATOS if there are
  some.  I have found a couple of docs with IOS to CATOS but no specific
  reference to these commands.

  Any help would be appreciated.
  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070319/3d8a2d30/attachment.html