[cisco-voip] Troubleshooting WS-X6608-T1 on Cat 6509 CATOS

[Jonathan Charles]

Crank up the traces to detailed on CCM and then run them through
TranslatorX...

It isn't clean, but it translates the traces into a language of human
understanding...

You can also use Dick Tracy, but TranslatorX is really slick.



Jonathan

On 3/19/07, Dane <d4rkf1ber at gmail.com> wrote:
>
> I am familiar with various voice troubleshooting techniques and
> commands with regards to PRIs on IOS gateways such as say a 3845 with
> IOS and two port T1/PRI card.
>
> I can do stuff like debug isdn q931, sh voice port and sh voice call
> and stuff like that.
>
> But I can't seem to find similiar commands for CATOS if there are
> some.  I have found a couple of docs with IOS to CATOS but no specific
> reference to these commands.
>
> Any help would be appreciated.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070319/3e06fcca/attachment.html