[cisco-voip] IOS H.323 transparent gateway

[Dietmar]

Hello,

is it possible to configure a router with two E1 interfaces to act as 
transparent H.323 gateway? This means that calls received on one E1 interface 
should be sent out on the other E1 interface and vice versa.

PBX <---> 2821 with two E1 <---> PSTN


Later, I would like to route special destination patterns to CCM:

PBX <---> 2821 with two E1 <---> PSTN
                 |
                 |
        IP to Callmanager (H.323)


Are there any configuration examples for such a scenario?


Thanks,
  Dietmar