[cisco-voip] IOS H.323 transparent gateway

[Ryan Ratliff]

dial-peer voice pots 1
incoming called-number .
port 0/0:23
direct-inward-dial
!
dial-peer voice pots 2
destination-pattern .
port 0/1:23
no digit-strip
!

I just threw that together off the top of my head, haven't verified  
even the command syntax is correct :)

But yes, it should be very simple to achieve this.  If you want to do  
digit manipulation you could do this as well.

-Ryan

On Mar 19, 2007, at 5:12 PM, Dietmar wrote:

Hello,

is it possible to configure a router with two E1 interfaces to act as
transparent H.323 gateway? This means that calls received on one E1  
interface
should be sent out on the other E1 interface and vice versa.

PBX <---> 2821 with two E1 <---> PSTN


Later, I would like to route special destination patterns to CCM:

PBX <---> 2821 with two E1 <---> PSTN
                  |
                  |
         IP to Callmanager (H.323)


Are there any configuration examples for such a scenario?


Thanks,
   Dietmar

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip