[cisco-voip] IOS H.323 transparent gateway

[bilay ozer]

Sure you can create trunk ( you need to define which is supported for Both
side of signaling)  connection like plar to PSTN or both ways.



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dietmar
Sent: Monday, March 19, 2007 10:12 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IOS H.323 transparent gateway

Hello,

is it possible to configure a router with two E1 interfaces to act as 
transparent H.323 gateway? This means that calls received on one E1
interface 
should be sent out on the other E1 interface and vice versa.

PBX <---> 2821 with two E1 <---> PSTN


Later, I would like to route special destination patterns to CCM:

PBX <---> 2821 with two E1 <---> PSTN
                 |
                 |
        IP to Callmanager (H.323)


Are there any configuration examples for such a scenario?


Thanks,
  Dietmar

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip