[cisco-voip] 7960s become unresponsive

[Jonathan Charles]

What version of code?

If you have a bunch of phones doing stupid stuff, I would get a new devpack
on there... just first step in troubleshooting this kind of thing...

If it's one phone, then it is could be a combination of firmware or
broken-phone syndrome.



Jonathan

On 3/20/07, jason.aarons at us.didata.com <jason.aarons at us.didata.com> wrote:
>
> What are some reasons for no dialtone on handset or spakerphone until you
> reboot phone....load issue ?
>
> Jason via Treo 700p
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070321/72e328e1/attachment.html