[cisco-voip] CM5 hardware requirements

[Matt Slaga (US)]

Well, minimum being a 2.8Ghz processor as it costs about ½ of a 2.4Ghz Xeon...

 

 

 

From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: Tuesday, March 20, 2007 10:29 PM
To: Matt Slaga (US)
Cc: Constel; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM5 hardware requirements

 

That isn't true.

A 7835 with a 2.4Ghz Xeon works fine, as long as it has one processor, but doesn't work if there are two (well, it does, but then you need four 72GB hard drives)

Or a 2.8Ghz processor, if it has one processor... but not if it has two... 

It is convoluted...



Jonathan

On 3/20/07, Matt Slaga (US) <Matt.Slaga at us.didata.com > wrote:

Minimum requirements is a 2.8Ghz processor, (2) 80Gb SATA (or 72Gb SCSI) and 2Gb RAM.

 

From: cisco-voip-bounces at puck.nether.net [mailto: cisco-voip-bounces at puck.nether.net <mailto:cisco-voip-bounces at puck.nether.net> ] On Behalf Of Jonathan Charles
Sent: Tuesday, March 20, 2007 4:57 PM
To: Constel
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM5 hardware requirements

 

The fact that you think it is enough is interesting...

CCM5 requires an MCS server and a minimum hard drive of 72GB... 

If it is a 7835, it is going to be looking for a pair of em...

I am also pretty sure you don't have the CPU juice to install CCM5... 

While we are at it, you don't have enough RAM (need 2GB)...




Jonathan

On 3/20/07, Constel < email at constel.com.br <mailto:email at constel.com.br> > wrote:


I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb Mem). 
I would like to install CM 5.x to make some tests on a lab environment, but
I got the following message during set up:
"The hardware you are using is not supported for this product".

I understand this hardware is old and I should use a newer one, but for lab 
purposes I think that's enough.
The question is: Is there any way to do this (I mean install cm 5.x on this
hardware) even upgrading hardware, or should I give up?

I couldn't find any paper explaining which MCS part number can be used to 
install CM5. Is there one?
I found just this, but it isn't exactly what I need:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html 

thanks in advance,

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck..nether.net/mailman/listinfo/cisco-voip <https://puck.nether.net/mailman/listinfo/cisco-voip> 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 

 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070321/b8083a78/attachment.html