[cisco-voip] CM5 hardware requirements

[Martin Lohnert]

For a lab, you could use that server to run vmware and install CM5 as
a virtual machine...
ML

On 3/20/07, Constel <email at constel.com.br> wrote:
>
> I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb Mem).
> I would like to install CM 5.x to make some tests on a lab environment, but
> I got the following message during set up:
> "The hardware you are using is not supported for this product".
>
> I understand this hardware is old and I should use a newer one, but for lab
> purposes I think that's enough.
> The question is: Is there any way to do this (I mean install cm 5.x on this
> hardware) even upgrading hardware, or should I give up?
>
> I couldn't find any paper explaining which MCS part number can be used to
> install CM5. Is there one?
> I found just this, but it isn't exactly what I need:
> http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html
>
> thanks in advance,
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>