[cisco-voip] CM5 hardware requirements

[Jonathan Charles]

True, I am running CM5.1 on VMWare workstation on my laptop... but.

If it doesn't detect VMWare, the install will fail if the hardware
requirements don't match.



Jonathan

On 3/21/07, Martin Lohnert <lohnert at gmail.com> wrote:
>
> For a lab, you could use that server to run vmware and install CM5 as
> a virtual machine...
> ML
>
> On 3/20/07, Constel <email at constel.com.br> wrote:
> >
> > I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb Mem).
> > I would like to install CM 5.x to make some tests on a lab environment,
> but
> > I got the following message during set up:
> > "The hardware you are using is not supported for this product".
> >
> > I understand this hardware is old and I should use a newer one, but for
> lab
> > purposes I think that's enough.
> > The question is: Is there any way to do this (I mean install cm 5.x on
> this
> > hardware) even upgrading hardware, or should I give up?
> >
> > I couldn't find any paper explaining which MCS part number can be used
> to
> > install CM5. Is there one?
> > I found just this, but it isn't exactly what I need:
> >
> http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html
> >
> > thanks in advance,
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070321/b4dea454/attachment.html