[cisco-voip] FW: CM5 hardware requirements

[Nick Kassel]

Ok, so this morning I managed to install CM 5.1 on VMware, it installed
fine and I imported a DMA backup, I am able to log in to the
administration & serviceability pages and view any menu fine, but when I
log into the OS Admin page, none of the menu options will open when I
click on them.

 

Has anyone come across this before and could this possibly be because of
the license.

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: 21 March 2007 15:04
To: Loraditch, Matthew*
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM5 hardware requirements

 

I installed 5.04 from an ISO and upgraded it to 5.1.1b

I had no problem... just make sure you select IDE for the hard drive,
give it 72GB (don't allocate space)... and it works fine... I have
phones up and gateways registered... 



Jonathan

On 3/21/07, Loraditch, Matthew* <mlorad1 at towson.edu> wrote:

The last time I tried to install CM 5 on vmware hardware detection
failed and at the time I read on the netpro forums that it was not going
to be allowed. Did they change this in 5.1?

 

Matthew Loraditch

 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Jonathan Charles 
Sent: Wed 3/21/2007 9:02 AM
To: Martin Lohnert
Cc: cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] CM5 hardware requirements

True, I am running CM5.1 on VMWare workstation on my laptop... but.

If it doesn't detect VMWare, the install will fail if the hardware
requirements don't match.



Jonathan

On 3/21/07, Martin Lohnert <lohnert at gmail.com > wrote: 

For a lab, you could use that server to run vmware and install CM5 as
a virtual machine... 
ML

On 3/20/07, Constel <email at constel.com.br> wrote:
>
> I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb Mem).

> I would like to install CM 5.x to make some tests on a lab
environment, but
> I got the following message during set up:
> "The hardware you are using is not supported for this product".
>
> I understand this hardware is old and I should use a newer one, but
for lab
> purposes I think that's enough.
> The question is: Is there any way to do this (I mean install cm 5.x on
this
> hardware) even upgrading hardware, or should I give up? 
>
> I couldn't find any paper explaining which MCS part number can be used
to
> install CM5. Is there one?
> I found just this, but it isn't exactly what I need:
>
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_bullet
in0900aecd80284099.html
>
> thanks in advance,
>
> _______________________________________________
> cisco-voip mailing list 
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

 

********************SAVE PAPER - THINK BEFORE YOU PRINT**************************************************

The information contained in this e-mail is strictly confidential, some or all of which may be legally privileged. 
Access to this e-mail by any person other than the recipient is prohibited. If you have received this message in
error, any use, disclosure, copying, printing, distribution of, replying to or any action taken or omitted to be
taken in reliance on this e-mail, is prohibited. Please advise the sender immediately should this e-mail have been 
incorrectly addressed or transmitted, and then delete the email and any attachment sent with it from your computer.

You are advised that urgent, time sensitive and confidential communications should not be sent by e-mail. You 
accept that any instructions are deemed to have been given at the time the recipient(s) accesses them and that 
delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s). 

You acknowledge that e-mails are not secure and you accept the risk of malfunction, viruses, unauthorised 
interference, mis-delivery or delay. Charles Stanley reserves the right to monitor and/or record emails sent and
received via its network for any lawful business purpose in accordance with applicable law and regulations.
*******************************************************************************************************


Charles Stanley & Co. Ltd
Registered Office: 25 Luke Street London EC2A 4AR

Tel: 0207 739 8200 Fax: 0207 739 7798
Registered in England No. 1903304

Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd  

Authorised and Regulated by the Financial Services Authority, Member of the London Stock Exchange, The 
International Capital Market Association and The London International Financial Futures & Options Exchange.

This footnote also confirms that this email message has been swept by McAfee VirusScan and SurfControl Email 
Filter software. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070323/7144017f/attachment-0001.html