[cisco-voip] FW: CM5 hardware requirements

[Jonathan Charles]

Reboot the box... Did you install 5.1 or 5.04 and upgrade to 5.1?



Jonathan

On 3/23/07, Nick Kassel <Nick.Kassel at charles-stanley.co.uk> wrote:
>
>
>
> Ok, so this morning I managed to install CM 5.1 on VMware, it installed
> fine and I imported a DMA backup, I am able to log in to the administration
> & serviceability pages and view any menu fine, but when I log into the OS
> Admin page, none of the menu options will open when I click on them.
>
>
>
> Has anyone come across this before and could this possibly be because of
> the license.
>
>
>
>
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* 21 March 2007 15:04
> *To:* Loraditch, Matthew*
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CM5 hardware requirements
>
>
>
> I installed 5.04 from an ISO and upgraded it to 5.1.1b
>
> I had no problem... just make sure you select IDE for the hard drive, give
> it 72GB (don't allocate space)... and it works fine... I have phones up and
> gateways registered...
>
>
>
> Jonathan
>
> On 3/21/07, *Loraditch, Matthew** <mlorad1 at towson.edu> wrote:
>
> The last time I tried to install CM 5 on vmware hardware detection failed
> and at the time I read on the netpro forums that it was not going to be
> allowed. Did they change this in 5.1?
>
>
>
> Matthew Loraditch
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net on behalf of Jonathan Charles
> *Sent:* Wed 3/21/2007 9:02 AM
> *To:* Martin Lohnert
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CM5 hardware requirements
>
> True, I am running CM5.1 on VMWare workstation on my laptop... but.
>
> If it doesn't detect VMWare, the install will fail if the hardware
> requirements don't match.
>
>
>
> Jonathan
>
> On 3/21/07, *Martin Lohnert* <lohnert at gmail.com > wrote:
>
> For a lab, you could use that server to run vmware and install CM5 as
> a virtual machine...
> ML
>
> On 3/20/07, Constel <email at constel.com.br> wrote:
> >
> > I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb Mem).
> > I would like to install CM 5.x to make some tests on a lab environment,
> but
> > I got the following message during set up:
> > "The hardware you are using is not supported for this product".
> >
> > I understand this hardware is old and I should use a newer one, but for
> lab
> > purposes I think that's enough.
> > The question is: Is there any way to do this (I mean install cm 5.x on
> this
> > hardware) even upgrading hardware, or should I give up?
> >
> > I couldn't find any paper explaining which MCS part number can be used
> to
> > install CM5. Is there one?
> > I found just this, but it isn't exactly what I need:
> >
> http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_bulletin0900aecd80284099.html
> >
> > thanks in advance,
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
>
> ********************SAVE PAPER - THINK BEFORE YOU PRINT**************************************************
>
>
> The information contained in this e-mail is strictly confidential, some or all of which may be legally privileged.
>
> Access to this e-mail by any person other than the recipient is prohibited. If you have received this message in
>
> error, any use, disclosure, copying, printing, distribution of, replying to or any action taken or omitted to be
>
> taken in reliance on this e-mail, is prohibited. Please advise the sender immediately should this e-mail have been
>
> incorrectly addressed or transmitted, and then delete the email and any attachment sent with it from your computer.
>
>
> You are advised that urgent, time sensitive and confidential communications should not be sent by e-mail. You
>
> accept that any instructions are deemed to have been given at the time the recipient(s) accesses them and that
>
> delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).
>
>
> You acknowledge that e-mails are not secure and you accept the risk of malfunction, viruses, unauthorised
>
> interference, mis-delivery or delay. Charles Stanley reserves the right to monitor and/or record emails sent and
>
> received via its network for any lawful business purpose in accordance with applicable law and regulations.
>
> *******************************************************************************************************
>
>
> Charles Stanley & Co. Ltd
> Registered Office: 25 Luke Street London EC2A 4AR
>
> Tel: 0207 739 8200 Fax: 0207 739 7798
> Registered in England No. 1903304
>
>
> Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd
>
>
> Authorised and Regulated by the Financial Services Authority, Member of the London Stock Exchange, The
>
> International Capital Market Association and The London International Financial Futures & Options Exchange.
>
>
> This footnote also confirms that this email message has been swept by McAfee VirusScan and SurfControl Email
> Filter software.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070323/219b26fc/attachment.html