[cisco-voip] FW: CM5 hardware requirements

[Ryan Ratliff]

Never seen that.  I just did an install this morning of 5.1.1b on  
vmware and the OS and everything worked fine before I had installed  
any license.   Sounds more like a browser issue to me though.  Maybe  
try clearing your cache?

-Ryan

On Mar 23, 2007, at 10:22 AM, Nick Kassel wrote:


Ok, so this morning I managed to install CM 5.1 on VMware, it  
installed fine and I imported a DMA backup, I am able to log in to  
the administration & serviceability pages and view any menu fine, but  
when I log into the OS Admin page, none of the menu options will open  
when I click on them.


Has anyone come across this before and could this possibly be because  
of the license.




From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: 21 March 2007 15:04
To: Loraditch, Matthew*
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM5 hardware requirements


I installed 5.04 from an ISO and upgraded it to 5.1.1b

I had no problem... just make sure you select IDE for the hard drive,  
give it 72GB (don't allocate space)... and it works fine... I have  
phones up and gateways registered...



Jonathan

On 3/21/07, Loraditch, Matthew* <mlorad1 at towson.edu> wrote:

The last time I tried to install CM 5 on vmware hardware detection  
failed and at the time I read on the netpro forums that it was not  
going to be allowed. Did they change this in 5.1?


Matthew Loraditch


From: cisco-voip-bounces at puck.nether.net on behalf of Jonathan Charles
Sent: Wed 3/21/2007 9:02 AM
To: Martin Lohnert
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM5 hardware requirements

True, I am running CM5.1 on VMWare workstation on my laptop... but.

If it doesn't detect VMWare, the install will fail if the hardware  
requirements don't match.



Jonathan

On 3/21/07, Martin Lohnert <lohnert at gmail.com > wrote:

For a lab, you could use that server to run vmware and install CM5 as
a virtual machine...
ML

On 3/20/07, Constel <email at constel.com.br> wrote:
 >
 > I have a MCS-7835-1266 for lab tests (PIII, 2x  18,2Gb SCSI, 1Gb  
Mem).
 > I would like to install CM 5.x to make some tests on a lab  
environment, but
 > I got the following message during set up:
 > "The hardware you are using is not supported for this product".
 >
 > I understand this hardware is old and I should use a newer one,  
but for lab
 > purposes I think that's enough.
 > The question is: Is there any way to do this (I mean install cm  
5.x on this
 > hardware) even upgrading hardware, or should I give up?
 >
 > I couldn't find any paper explaining which MCS part number can be  
used to
 > install CM5. Is there one?
 > I found just this, but it isn't exactly what I need:
 > http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/ 
prod_bulletin0900aecd80284099.html
 >
 > thanks in advance,
 >
 > _______________________________________________
 > cisco-voip mailing list
 > cisco-voip at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/cisco-voip
 >
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip





********************SAVE PAPER - THINK BEFORE YOU  
PRINT**************************************************

The information contained in this e-mail is strictly confidential,  
some or all of which may be legally privileged.
Access to this e-mail by any person other than the recipient is  
prohibited. If you have received this message in
error, any use, disclosure, copying, printing, distribution of,  
replying to or any action taken or omitted to be
taken in reliance on this e-mail, is prohibited. Please advise the  
sender immediately should this e-mail have been
incorrectly addressed or transmitted, and then delete the email and  
any attachment sent with it from your computer.

You are advised that urgent, time sensitive and confidential  
communications should not be sent by e-mail. You
accept that any instructions are deemed to have been given at the  
time the recipient(s) accesses them and that
delivery receipt does not constitute acknowledgement or receipt by  
the intended recipient(s).

You acknowledge that e-mails are not secure and you accept the risk  
of malfunction, viruses, unauthorised
interference, mis-delivery or delay. Charles Stanley reserves the  
right to monitor and/or record emails sent and
received via its network for any lawful business purpose in  
accordance with applicable law and regulations.
************************************************************************ 
*******************************


Charles Stanley & Co. Ltd
Registered Office: 25 Luke Street London EC2A 4AR

Tel: 0207 739 8200 Fax: 0207 739 7798
Registered in England No. 1903304

Charles Stanley Sutherlands and Charles Stanley Securities are  
divisions of Charles Stanley & Co. Ltd

Authorised and Regulated by the Financial Services Authority, Member  
of the London Stock Exchange, The
International Capital Market Association and The London International  
Financial Futures & Options Exchange.

This footnote also confirms that this email message has been swept by  
McAfee VirusScan and SurfControl Email
Filter software.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip