[cisco-voip] Putting a H.323 voice port in a call pickup group?

[Jonathan Charles]

Sure.

Create a route-pattern on CCM with that DN, point it at the H.323 gateway

On the gateway, create a dial-peer with that destination-pattern pointing to
that port...



Jonathan

On 3/23/07, Robert Kulagowski <bob at smalltime.com> wrote:
>
> Centralized CM, remote sites.  MGCP has proven too problematic /
> unreliable, so I'm trying to migrate to H.323 only.
>
> We have overhead ringers connected to FXS ports on 2821/2851 routers;
> dial the DN, and the device starts to ring.  What we do is call forward
> the main number to the DN of the ringer, so that if the receptionist is
> away, anyone can pickup with the Group Pickup button when they hear the
> overhead ringer.
>
> All of this works if we use MGCP for the analog ports.
>
> Is there any way to do this with H.323?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070323/755e6d8f/attachment.html