[cisco-voip] Putting a H.323 voice port in a call pickup group?

[Robert Kulagowski]

Jonathan Charles wrote:
> Sure.
> 
> Create a route-pattern on CCM with that DN, point it at the H.323 gateway
> 
> On the gateway, create a dial-peer with that destination-pattern 
> pointing to that port...

That part worked (we had it working before), but how do I make it part 
of the call pickup group?

I've tried:

1)  Putting a *71 line appearance on a phone, but I don't get a 
simultaneous ring on the phone and on the H.323 FXS port.
2)  Putting in a "virtual" DN in a CTI port, but that doesn't work either.