[cisco-voip] Putting a H.323 voice port in a call pickup group?

[Kris Seraphine]

I don't think there's any way to make that work.  If MGCP won't work for
you, an ATA 186 might be your best bet.



On 3/23/07, Robert Kulagowski <bob at smalltime.com> wrote:
>
> Jonathan Charles wrote:
> > Sure.
> >
> > Create a route-pattern on CCM with that DN, point it at the H.323gateway
> >
> > On the gateway, create a dial-peer with that destination-pattern
> > pointing to that port...
>
> That part worked (we had it working before), but how do I make it part
> of the call pickup group?
>
> I've tried:
>
> 1)  Putting a *71 line appearance on a phone, but I don't get a
> simultaneous ring on the phone and on the H.323 FXS port.
> 2)  Putting in a "virtual" DN in a CTI port, but that doesn't work either.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070328/2796ee09/attachment.html