[cisco-voip] VG 224 SCCP and H323 Mixed Mode

[Kalle Tetto]

if sccp and h.323 works, then should mgcp and sccp also no problem ,or 
I'm wrong?

Cheers

Jonathan Charles schrieb:
> I have run the VG224 in mixed mode... and it works fine...
> 
> Just leave the H.323 ports unconfigured in CCM, and configure H.323 
> dial-peers on the 224.
> 
> 
> 
> Jonathan
> 
> On 3/22/07, *Kalle Tetto* <tettokalle at hotmail.com 
> <mailto:tettokalle at hotmail.com>> wrote:
> 
>     Hi all,
> 
>     I have an VG224 with modem, faxes and analog phones. As far as I can see
>       now, the only way to configure the VG224 is SCCP mode, because I will
>     have to use forward, pickup and transfer.
> 
>     For the modem and fax ports, should I now configure SCCP or H323.
> 
>     What are your experiences with SCCP and modems, FAX?
> 
>     If I configure the ports of the VG224 which will be connected to fax and
>     modems using H323, i can use modem and fax passthrough. what would the
>     configuration looks like?
> 
>     Do I have to register the the VG224 as H323 gateway and SCCP gateway?
> 
>     I know, alot of question, but hopefully you have more experience in
>     VG224 than me.
> 
>     Cheers
>     Christian
> 
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>     <https://puck.nether.net/mailman/listinfo/cisco-voip>
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip