[cisco-voip] VG 224 SCCP and H323 Mixed Mode

[Jonathan Charles]

I have run the VG224 in mixed mode... and it works fine...

Just leave the H.323 ports unconfigured in CCM, and configure
H.323dial-peers on the 224.



Jonathan

On 3/22/07, Kalle Tetto <tettokalle at hotmail.com> wrote:
>
> Hi all,
>
> I have an VG224 with modem, faxes and analog phones. As far as I can see
>   now, the only way to configure the VG224 is SCCP mode, because I will
> have to use forward, pickup and transfer.
>
> For the modem and fax ports, should I now configure SCCP or H323.
>
> What are your experiences with SCCP and modems, FAX?
>
> If I configure the ports of the VG224 which will be connected to fax and
> modems using H323, i can use modem and fax passthrough. what would the
> configuration looks like?
>
> Do I have to register the the VG224 as H323 gateway and SCCP gateway?
>
> I know, alot of question, but hopefully you have more experience in
> VG224 than me.
>
> Cheers
> Christian
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070323/83365d70/attachment.html