[cisco-voip] ISR onboard PVDM2 slots and an VWIC-2MFT-T!/E1

[Ahmed Elnagar]

I had this issue before but I was using VWIC-2MFT-E1 for voice calls only. with a 3845 router and with the VWIC and with the right DSPs required I was able to run both ports and terminate voice calls from PSTN on it. I donot know what about modem calls.
 
Thanks and Best Regards

Ahmed A. Elnagar
Network Field Engineer
 
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt 
Postal Code:12411 Cairo Egypt

Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar at act-eg.com

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Djerk Geurts
Sent: Sat 24-Mar-07 2:49 AM
To: Cisco-Voip
Subject: [cisco-voip] ISR onboard PVDM2 slots and an VWIC-2MFT-T!/E1



Not sure if I should be posting this to c-nsp instead but here it goes...

I need to terminate both ISDN and PSTN calls. I'd envisioned a 2811 with
NM-HDV2-2T1/E1 and a PVDM2-16. This would allow me to scale to 120 B
channels where each channel could terminate data and/or voice.

That was untill I noticed the ISRs have their own PVDM2 slots. Can I
simplify the 2811 to the following kit-list?
 2801
 PVDM2-16
 VWIC-2MFT-T1/E1

This should allow me to terminate 60 B chanels of which 8 may be analog
modem calls, right?

If so would anyone happen to have a CCO link for me detailing the support?
I've got loads of links on the VWIC alone and the NM-HDV2 but nowhere do I
find proof that I can terminate modem calls using an MFT VWIC and the
onboard PVDMs.

TIA,

--
Djerk
www.djerk.nl

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070324/a09d95eb/attachment.html