[cisco-voip] Adding Number to PRI

[Jonathan Charles]

On the outbound is easy, just change the mask on the DN.

On the inbound you must engage your provider to have them port the number to
the pri



Jonathan

On 3/27/07, Todd Franklin <toddnh65 at gmail.com> wrote:
>
> I have a 2801 with 2 POTS lines.  (let's say 555-1212 and 555-1313)
>
> 1212 is the main line for this building, so we are not getting Caller ID.
> What's the easier solution?  Map 555-1212 to the PRI and somehow tell CCM
> where to route it,
> or reconfigure the 2801 to do Caller ID?
>
> I actually prefer to move 1212 to the PRI, but wouldn't know where to
> start (other than to call my phone company and tell them to do it)!
>
> Todd
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070328/42738c4d/attachment.html