[cisco-voip] Adding Number to PRI

[Todd Franklin]

Yeah, my provider can port the number real easy.
My question is, what do I have to do in CCM or Unity to route 1212 as it
comes in on the PRI to the proper phone??

On 3/28/07, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> On the outbound is easy, just change the mask on the DN.
>
> On the inbound you must engage your provider to have them port the number
> to the pri
>
>
>
> Jonathan
>
> On 3/27/07, Todd Franklin <toddnh65 at gmail.com> wrote:
>
> > I have a 2801 with 2 POTS lines.  (let's say 555-1212 and 555-1313)
> >
> > 1212 is the main line for this building, so we are not getting Caller
> > ID.
> > What's the easier solution?  Map 555-1212 to the PRI and somehow tell
> > CCM where to route it,
> > or reconfigure the 2801 to do Caller ID?
> >
> > I actually prefer to move 1212 to the PRI, but wouldn't know where to
> > start (other than to call my phone company and tell them to do it)!
> >
> > Todd
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070328/e407b9e5/attachment.html