[cisco-voip] Adding Number to PRI

[Jonathan Charles]

It probably already does, if he currently gets calls on that PRI...


Jonathan

On 3/28/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
>
> technically, the inbound CSS on your PRI gateway must contain the
> partition where you configure DN 1212.
>
>
>
> On 3/28/07, Todd Franklin < toddnh65 at gmail.com> wrote:
> >
> > Yeah, my provider can port the number real easy.
> > My question is, what do I have to do in CCM or Unity to route 1212 as it
> > comes in on the PRI to the proper phone??
> >
> > On 3/28/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > >
> > > On the outbound is easy, just change the mask on the DN.
> > >
> > > On the inbound you must engage your provider to have them port the
> > > number to the pri
> > >
> > >
> > >
> > > Jonathan
> > >
> > > On 3/27/07, Todd Franklin <toddnh65 at gmail.com> wrote:
> > >
> > > >  I have a 2801 with 2 POTS lines.  (let's say 555-1212 and 555-1313)
> > > >
> > > > 1212 is the main line for this building, so we are not getting
> > > > Caller ID.
> > > > What's the easier solution?  Map 555-1212 to the PRI and somehow
> > > > tell CCM where to route it,
> > > > or reconfigure the 2801 to do Caller ID?
> > > >
> > > > I actually prefer to move 1212 to the PRI, but wouldn't know where
> > > > to start (other than to call my phone company and tell them to do it)!
> > > >
> > > > Todd
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070328/b2da96f0/attachment.html