[cisco-voip] Audio Codec

[Kris Seraphine]

That's a good question.  I thought it would be a service parameter but I
don't see one.

I think the phone will automatically negotiate with the gateway to choose
the alaw or ulaw but I don't know this for sure.

Maybe you can't change the companding type for IP phone to IP phone calls.

On 3/26/07, Ahmed Elnagar <aelnagar at act-eg.com> wrote:
>
>  Hello all;
>
> anybody knows how to change the Audio codec of IP Phones from G.711u to
> G.711a. this is not available from region configuration all I can set is
> just G.711. any ideas (I am using CM ver 4.1(3)sr2)
>
>  Thanks and Best Regards
> *
> Ahmed A. Elnagar
> *Network Field Engineer
>
> Advanced Computer Technology (ACT)
> 16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt
> Postal Code:12411 Cairo Egypt
>
> *Mob**:* +2010-2833868
> *Website**: *www.act-eg.com
> *E-mail**: *aelnagar at act-eg.com
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070328/b9d43508/attachment.html