[cisco-voip] SS7 and 5350XM

[Sales@Doretel]

You need a PGW-2200 for Signaling. If you would like a quote give me a call.

Visit us online today... www.DORETEL.com

Shane Breen
DORETEL Communications, Inc.
Director of Sales & Marketing
P: 404.755.5721
F: 404.529.4617
sbreen at doretel.com
www.DORETEL.com
AIM: ShaneBreen2003

Your Total VoIP Solutions Provider... Call Today 404.755.5721
----- Original Message ----- 
From: "Daniel Lacey" <daniel_p_lacey at yahoo.com>
To: <cisco-voip at puck.nether.net>
Sent: Wednesday, March 28, 2007 4:06 PM
Subject: [cisco-voip] SS7 and 5350XM


> Is anyone handling SS7 (56K DDS links) in a Cisco VoIP environment at
> the network edge?
>
> I would like to know what equipment is successfully being used in the 
> field.
>
> I searched on the Cisco website, but I am having trouble narrowing down
> a specific application to handle call setup using SS7.
>
> I will use 5350XM units to terminate the trunking, and a 7613 at the
> network core.
> So far, I believe I will need 2 SLTs to physically connect the SS7 links.
> From there I am kinda lost...
> I found that the docs point toward "Cisco SS7 Interconnect for Access
> Servers Solution 2.2", using an SC2200. Is this the same as a PGW2200???
>
> Any ideas would be welcome!
>
> Thanks,
> Dan Lacey
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip