[cisco-voip] Copying a Phone

[Johnny Crothers]

The only way I can think of is to export the device using BAT which will
include all the line configurations, change the MAC address and
re-import?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul Choi
Sent: 01 May 2007 15:58
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Copying a Phone

If there *is* a way to copy them all at once, I'd sure
like to know about it because I've been configuring
all 7960+7914s manually.

--- Todd Franklin <toddnh65 at gmail.com> wrote:

> Hey everyone.
> I have a situation whereby our admission room has 3
> Cisco 7960s with 7914s
> attached.  All 14 lines on the 7914 are allocated
> and have text labels.
> Anyways, we decided to add a 4th phone.  So I copied
> one working phone, and
> plugged in the new MAC address, gave it an extension
> when it prompted me to,
> and voila, all set.  Except my 7914 had only the
> "hidden extension" numbers,
> not the text.  I had to go into each line in CCM and
> assign the text.  I am
> sure there is a way to "copy it all" rather than the
> way I went.  Or is
> there?  just curious, because I have a similar setup
> we are adding a phone
> to in the next few weeks.
> 
> Thanks.
> > _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX

Please consider the environment before printing this e-mail
**********************************************************************