[cisco-voip] why do i need cmd " card type 0 0

[Kris Seraphine]

i believe that's how you set the card to be in T1 or E1 mode. The command is
card type t1 or e1 0 0 .

On 5/3/07, James Grace <jgrace at adcapnet.com> wrote:
>
> ? I added a VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 to my
> 2821 router.  and for some reason i needed to add the "card type 0 0"
> command to the router before i could see the t1 controllers.  This stump me
> be cause i never had to do this before.  Can someone explain to me why now i
> have to add this command
>
>
>
>  James Grace
>
> Systems Engineer
> Adcap Network Systems, Inc.
> 6865 Shiloh Road East, Suite 250
> Alpharetta, GA 30005
>
> office: 678-456-6986
> direct: 678-456-6761
> jgrace at adcapnet.com
> www.adcapnet.com
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070503/f0f235c7/attachment.html