[cisco-voip] why do i need cmd " card type 0 0

James Grace jgrace at adcapnet.com
Thu May 3 16:05:47 EDT 2007


?
I added a VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 to my 2821 router.  and for some reason i needed to add the "card type 0 0" command to the router before i could see the t1 controllers.  This stump me be cause i never had to do this before.  Can someone explain to me why now i have to add this command
 
 
 
James Grace 
 
Systems Engineer
Adcap Network Systems, Inc.
6865 Shiloh Road East, Suite 250
Alpharetta, GA 30005
 
office: 678-456-6986
direct: 678-456-6761
jgrace at adcapnet.com
www.adcapnet.com <http://www.adcapnet.com/> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070503/0928ffb5/attachment.html 


More information about the cisco-voip mailing list