[cisco-voip] can't register new gateway

[Justin Steinberg]

Is your gateway name configured as

vgw-kemptville.net.uoguelph.ca

I see you mentioned that you put the domain name in the description
field, but the domain name should be concatenated with the hostname
and the entire string is used as the device name for the mgcp gw
configuration in ccmadmin.


On 5/9/07, Patrick Mowry <pmowry at getgds.com> wrote:
> >From your config:
>  no network-clock-participate wic 0
>  no network-clock-participate wic 1
>
> I think this may be keeping the controller configs from ccm-manager
> download from taking effect.  Take the no out from in front and force
> another ccm-manager download and see what happens.  Also you can do a
> debug on the download to see it CallManager is responding with a config
> file and verify the router is sending the device name the same as you
> have configured in CallManager.  I do not believe DNS resolution is
> required.
>
> -Patrick
> ________________________________
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Wednesday, May 09, 2007 1:49 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] can't register new gateway
>
>
>
> so i can't seem to ge this new 3845 gateway to register to my publisher.
> i can ping both ways (pub <-> gw) so communications is there. i must be
> missing some configuration command, but can seem to get it. i made sure
> to:
>
> *       enable routing
> *       make the description of the gateway equal the domain on the
> router
> *       add the ccm-manager config statement
>
> is there an mgcp command that i'm missing? config and show ccm-manager
> follows
>
>
>
> grrrrrr
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>