[cisco-voip] CCM 3.3 to 4.1 upgrade, update lines...

Avner Izhar aizhar at ccbootcamp.com
Sun May 13 14:40:39 EDT 2007


You can do most of it with BAT, if not all.
 
Haven't seen any batch for that sort of things yet ...
 
Regards,
 
Avner Izhar, CCIE #15999 (Voice)
Network Learning Inc.

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Jonathan Charles
Sent: Sun 5/13/2007 9:53 AM
To: ciscovoip
Subject: [cisco-voip] CCM 3.3 to 4.1 upgrade, update lines...



So, standard 3.3 setup, each DN in a  line 1 and line 2 partition...

Upgraded to 4.1(3) and was wondering if there is a batch file that will
delete the second line, change the max calls and busy trigger on line 1 to 4
and 2, respectively and change the CFNA and CFB settings on line 1 to go to
vmail.

This is happening enough that such a batch file would be immensely valuable.






Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070513/cdaf6fd2/attachment.html 


More information about the cisco-voip mailing list