[cisco-voip] CCM 3.3 to 4.1 upgrade, update lines...

[Fred Nielsen]

BAT will do most, and the AXL API allows access to everything that BAT can't
do.  AXL calls can be batch scripted to do just about *anything* you can do
via the GUI.

On 5/13/07, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> So, standard 3.3 setup, each DN in a  line 1 and line 2 partition...
>
> Upgraded to 4.1(3) and was wondering if there is a batch file that will
> delete the second line, change the max calls and busy trigger on line 1 to 4
> and 2, respectively and change the CFNA and CFB settings on line 1 to go to
> vmail.
>
> This is happening enough that such a batch file would be immensely
> valuable.
>
>
>
>
>
>
> Jonathan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070513/224fa231/attachment.html