[cisco-voip] FW: 4.1 to 5.0 on MCS7835 hardware

Voll, Scott Scott.Voll at wesd.org
Mon May 14 19:05:42 EDT 2007


You have to have a minimum of 2 gig's of ram......... you have to have a
minimum of 72 gig hard drives............. You need a CPU that is twice
the horsepower of a 1266.  I would say NO.  it just flat out will not
work. Or be supported for that matter.

 

If you wanted to spend the money on the upgrade I would put it into new
HP servers.  (next time I upgrade hw it will not be MCS.... They will be
HP)

 

Just my 2 cents.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Webster, Andy
Sent: Monday, May 14, 2007 3:13 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FW: 4.1 to 5.0 on MCS7835 hardware

 

 


Hi,

            I have two servers MCS7835-1266-TD.  They're on the list
http://www.cisco.com/en/US/customer/products/hw/voiceapp/ps378/prod_broc
hure0900aecd8062a4f9.html as being unable to upgrade to 5.0 or 6.0.

            Does that mean there is something in the install that won't
work?  Or will I just not have support from cisco once I upgrade the
servers?  Long term I probably need a hardware upgrade, but will this
upgrade work short term?  I have a very low number of phones in use on
these servers.



Thanks,

Andy





-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070514/35652110/attachment-0001.html 


More information about the cisco-voip mailing list