[cisco-voip] how do you set mgcp to 5ess

Carter, Bill bcarter at sentinel.com
Thu May 24 21:31:19 EDT 2007


You should be able to use Primary-NI when the switch type is 5ess for
the MGCP config.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, May 23, 2007 11:21 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how do you set mgcp to 5ess


? 
how do you set mgcp to 5ess  trying to turn up a pri with switch type
5ess  .  for some resome when we reboot the route it reverts back to
primary-NI
 
and on the callmanager theres no 5ess
have anybody seen this
 
James Grace 
 
Systems Engineer
Adcap Network Systems, Inc.
6865 Shiloh Road East, Suite 250
Alpharetta, GA 30005
 
office: 678-456-6986
direct: 678-456-6761
jgrace at adcapnet.com
www.adcapnet.com <http://www.adcapnet.com/> 
Disclaimer For ADCAP Network Systems

"The information transmitted is intended only for the person or entity
to which it is addressed and may
contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of,
or taking of any action in reliance upon this information by persons or
entities other than the intended
recipient is prohibited. If you received this message in error, please
contact the sender and delete the
material from all computers."

This original email was sent to the internet for delivery at 23 May 2007
12:22:06 -0400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070524/e3e39a2a/attachment-0001.html 


More information about the cisco-voip mailing list