[cisco-voip] how do you set mgcp to 5ess

[Jimmy Pale]

5E8 Custom

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, May 23, 2007 11:21 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how do you set mgcp to 5ess

 

?

how do you set mgcp to 5ess  trying to turn up a pri with switch type 5ess
.  for some resome when we reboot the route it reverts back to primary-NI

 

and on the callmanager theres no 5ess

have anybody seen this

 

James Grace 

 

Systems Engineer

Adcap Network Systems, Inc.

6865 Shiloh Road East, Suite 250

Alpharetta, GA 30005

 

office: 678-456-6986

direct: 678-456-6761

jgrace at adcapnet.com

www.adcapnet.com <http://www.adcapnet.com/> 

Disclaimer For ADCAP Network Systems
 
"The information transmitted is intended only for the person or entity to
which it is addressed and may
contain confidential and/or privileged material. Any review, retransmission,
dissemination or other use of,
or taking of any action in reliance upon this information by persons or
entities other than the intended
recipient is prohibited. If you received this message in error, please
contact the sender and delete the
material from all computers."
 
This original email was sent to the internet for delivery at 23 May 2007
12:22:06 -0400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070524/5cfbbd44/attachment.html