[cisco-voip] Problem with 7920 - ringing but no sound

Fri May 25 08:49:40 EDT 2007

Konne,

Is that you have ringing on the phone, but you don`t hear the ringtone? or
is it no audio in your call?
Can you hear the ringtone, if you change it on the phone?
It could be, that the ringtones are not served on you CME, you will have to
include them in your tftp-server configuration, which is missing by the way
in your configuration.
If you are running cme, and the raw files are not uploaded to the phone, but
the are accesible in your (default) ringlist, it cannot play the audio,
excepte for the default raw files that come preloaded in the phone.

So i would advise you to read the CME installation and configuration
document, on how to configure this correctly.

good luck,

erik

2007/5/25, Konne <bridge_stone at gmx.net>:
>
> Konne wrote:
>
> > hi,
> >
> > no audio at all, only a noise...
> >
> > bye
> >
> > Matthew Saskin wrote:
> >
> >> Are you getting no audio at all or only one way audio?
> >>
> >> -matt
> >>
> >> Konne wrote:
> >>
> >>> hi @ all,
> >>>
> >>> i have a little problem with my Cisco VoIP. I' ve a WLAN
> >>> Infrastructure and i would like to implement VoIP now.
> >>> my problem is that the phones are communicating well, only that i
> >>> can hear nothing.
> >>>
> >>> have you any suggests
> >>>
> >>> thx
> >>>
> >>>
> >>> my network:
> >>>
> >>>
> >>> Router2811 with DSP ----- TRUNK dot1q ------
> >>> Catalyst3750------------ ACS
> >>>
> >>>                   |
> >>>
> >>>                   |
> >>>
> >>>             AP1240
> >>>
> >>>
> >>>                                                           ephone1
> >>> 7920                     ephone2 7920
> >>>
> >>>
> >>> my config Router2811:
> >>>
> >>> router2811#sh run
> >>> Building configuration...
> >>>
> >>> Current configuration : 2961 bytes
> >>> !
> >>> ! Last configuration change at 11:52:04 MESZ Thu May 24 2007 by
> >>> router2811
> >>> ! NVRAM config last updated at 11:52:06 MESZ Thu May 24 2007 by
> >>> router2811
> >>> !
> >>> version 12.3
> >>> service timestamps debug datetime msec
> >>> service timestamps log datetime msec
> >>> service password-encryption
> >>> !
> >>> hostname router2811
> >>> !
> >>> boot-start-marker
> >>> boot-end-marker
> >>> !
> >>> logging buffered 51200 warnings
> >>> !
> >>> clock timezone MEZ 1
> >>> clock summer-time MESZ recurring last Sun Mar 2:00 last Sun Oct 3:00
> >>> no aaa new-model
> >>> ip subnet-zero
> >>> !
> >>> !
> >>> ip cef
> >>> !
> >>> !
> >>> ip domain name +++++
> >>> ip name-server 192.168.138.10
> >>> ip name-server 192.168.138.11
> >>> no ftp-server write-enable
> >>> !
> >>> voice-card 0
> >>>  no dspfarm
> >>>  dsp services dspfarm
> >>> !
> >>> username +++++++ privilege 15 secret 5 ++++++++
> >>> !
> >>> !
> >>> !
> >>> !
> >>> interface FastEthernet0/0
> >>>  no ip address
> >>>  duplex auto
> >>>  speed auto
> >>> !
> >>> interface FastEthernet0/0.1
> >>>  description Management
> >>>  encapsulation dot1Q 1 native
> >>>  ip address 192.168.250.20 255.255.255.0
> >>> !
> >>> interface FastEthernet0/0.138
> >>>  description Server
> >>>  encapsulation dot1Q 138
> >>>  ip address 192.168.138.2 255.255.255.0
> >>>  no cdp enable
> >>> !
> >>> interface FastEthernet0/0.184
> >>>  description Admin
> >>>  encapsulation dot1Q 184
> >>>  ip address 192.168.184.2 255.255.255.0
> >>>  no cdp enable
> >>> !
> >>> interface FastEthernet0/0.880
> >>>  description VoIP
> >>>  encapsulation dot1Q 880
> >>>  ip address 10.95.180.5 255.255.255.0
> >>> !
> >>> interface FastEthernet0/1
> >>>  no ip address
> >>>  shutdown
> >>>  duplex auto
> >>>  speed auto
> >>> !
> >>> ip classless
> >>> !
> >>> !
> >>> no ip http server
> >>> ip http authentication local
> >>> ip http secure-server
> >>> ip http timeout-policy idle 60 life 86400 requests 10000
> >>> !
> >>> access-list 10 permit 192.168.184.0 0.0.0.255
> >>> access-list 10 permit 192.168.185.0 0.0.0.7
> >>> access-list 10 permit 192.168.250.0 0.0.0.255
> >>> !
> >>> !
> >>> !
> >>> control-plane
> >>> !
> >>> telephony-service
> >>>  max-ephones 10
> >>>  max-dn 10
> >>>  ip source-address 10.95.180.5 port 2000
> >>>  time-format 24
> >>>  date-format dd-mm-yy
> >>>  user-locale DE
> >>>  network-locale IT
> >>>  create cnf-files version-stamp 7960 May 23 2007 12:24:26
> >>>  max-conferences 8
> >>>  transfer-system full-blind
> >>>  transfer-pattern ...
> >>> !
> >>> !
> >>> ephone-dn  1
> >>>  number 750
> >>> !
> >>> !
> >>> ephone-dn  2
> >>>  number 751
> >>> !
> >>> !
> >>> ephone  1
> >>>  mac-address 0019.AAmac
> >>>  button  1:1
> >>> !
> >>> !
> >>> !
> >>> ephone  2
> >>>  mac-address 0019.AAmac2
> >>>  button  1:2
> >>> !
> >>> !
> >>> line con 0
> >>>  login local
> >>> line aux 0
> >>> line vty 0 4
> >>>  access-class 10 in
> >>>  exec-timeout 30 0
> >>>  privilege level 15
> >>>  login local
> >>>  transport input telnet ssh
> >>> line vty 5 15
> >>>  access-class 10 in
> >>>  exec-timeout 30 0
> >>>  privilege level 15
> >>>  login local
> >>>  transport input telnet ssh
> >>> !
> >>> scheduler allocate 20000 1000
> >>> ntp server 62.101.81.203 source FastEthernet0/0.138
> >>> ntp server 62.152.126.5 source FastEthernet0/0.138
> >>> !
> >>> end
> >>>
> >>> _______________________________________________
> >>> cisco-voip mailing list
> >>> cisco-voip at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>
> >>
> >>
> >>
> >
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070525/13027eb9/attachment.html 