[cisco-voip] Catalyst 6500 switch as Voice Gateway

[zohaib shabir]

Thanks for the reply,
Problem for me is my client wants 60 FXO ports per router i cannot do even
through 3845. Please advise me which way to go

On 5/25/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>  sure, you can use the CMM modules with FXO or PRI ports.
>
> take a serious look at comparing the cost of the blades with an ISR
> though.
>
> you'll be surprised as to how much cheaper it can be.
>
> and you'll get to use the ISR for all sorts of other stuff like SRST.
> granted you can use the CMM for SRST but it is limited in memory.
>
>
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."
> WJR
>
> ----- Original Message -----
> *From:* zohaib shabir <zohaibshabir at gmail.com>
> *To:* cisco-voip at puck.nether.net ; cisco-voip-request at puck.nether.net
> *Sent:* Friday, May 25, 2007 1:04 PM
> *Subject:* [cisco-voip] Catalyst 6500 switch as Voice Gateway
>
> Dear All,
> Can we use Catalyst 6500 series switch as Voice gateway.
>
> --
> Regards,
> Zohaib Shabir
> Network Engineer(Voice and PreSales)
> DWP Group, TECH Division
> Ph:+92-302-8232689
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Zohaib Shabir
Network Engineer(Voice and PreSales)
DWP Group, TECH Division
Ph:+92-302-8232689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070525/6f924187/attachment.html