[cisco-voip] Catalyst 6500 switch as Voice Gateway

[Lelio Fulgenzi]

OMG - the CMM does not have FXO ports! 

WTH?


--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: Matt Slaga (US) 
  To: Lelio Fulgenzi ; zohaib shabir ; Craig Staffin 
  Cc: cisco-voip at puck.nether.net 
  Sent: Friday, May 25, 2007 3:09 PM
  Subject: RE: [cisco-voip] Catalyst 6500 switch as Voice Gateway


  Unless they are integrating into some kind of antiquated IVR system that needs FXO inputs, I would strongly suggest you find a different solution for the customer.  You will have one heck of a time configuring all those ports, not too mention how much doo-doo you and the customer would be in if you have any FXO disconnect supervision problems.

   

  My 2 cents

   

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
  Sent: Friday, May 25, 2007 2:38 PM
  To: zohaib shabir; Craig Staffin
  Cc: cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway

   

  Ask the client what their goals are. Work from there. You can do quite a bit with PRI configuration.

   

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

    ----- Original Message ----- 

    From: zohaib shabir 

    To: Craig Staffin 

    Cc: Lelio Fulgenzi ; cisco-voip-request at puck.nether.net ; cisco-voip at puck.nether.net 

    Sent: Friday, May 25, 2007 1:50 PM

    Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway

     

    Well actually my client does not want the PRI lines he wants FXO ports so that he gets 60 lines independent of each other.

    On 5/25/07, Craig Staffin < craig at staffin.org> wrote: 

    why would anyone need that many FXO ports.  If thats the case you should be looing at some form of digital communication. 

    Craig 

     

    On 5/25/07, zohaib shabir <zohaibshabir at gmail.com> wrote: 

    Thanks for the reply,
    Problem for me is my client wants 60 FXO ports per router i cannot do even through 3845. Please advise me which way to go 

     

    On 5/25/07, Lelio Fulgenzi < lelio at uoguelph.ca> wrote: 

    sure, you can use the CMM modules with FXO or PRI ports.

     

    take a serious look at comparing the cost of the blades with an ISR though.

     

    you'll be surprised as to how much cheaper it can be.

     

    and you'll get to use the ISR for all sorts of other stuff like SRST. granted you can use the CMM for SRST but it is limited in memory.

     

     

    --------------------------------------------------------------------------------
    Lelio Fulgenzi, B.A.
    Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
    (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
    "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

      ----- Original Message ----- 

      From: zohaib shabir 

      To: cisco-voip at puck.nether.net ; cisco-voip-request at puck.nether.net 

      Sent: Friday, May 25, 2007 1:04 PM 

      Subject: [cisco-voip] Catalyst 6500 switch as Voice Gateway

       

      Dear All,
      Can we use Catalyst 6500 series switch as Voice gateway.

      -- 
      Regards,
      Zohaib Shabir
      Network Engineer(Voice and PreSales)
      DWP Group, TECH Division
      Ph:+92-302-8232689 


--------------------------------------------------------------------------

      _______________________________________________
      cisco-voip mailing list
      cisco-voip at puck.nether.net
      https://puck.nether.net/mailman/listinfo/cisco-voip




    -- 
    Regards,
    Zohaib Shabir
    Network Engineer(Voice and PreSales)
    DWP Group, TECH Division
    Ph:+92-302-8232689 


    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net 
    https://puck.nether.net/mailman/listinfo/cisco-voip




    -- 



    Craig Staffin
    Craig at staffin.org
    (H) 262-437-7313 
    (C) 262-613-6003 




    -- 
    Regards,
    Zohaib Shabir
    Network Engineer(Voice and PreSales)
    DWP Group, TECH Division
    Ph:+92-302-8232689 



------------------------------------------------------------------------------


  Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070525/2b2d05c3/attachment.html