[cisco-voip] Catalyst 6500 switch as Voice Gateway

[Matt Slaga (US)]

Unless they are integrating into some kind of antiquated IVR system that
needs FXO inputs, I would strongly suggest you find a different solution
for the customer.  You will have one heck of a time configuring all
those ports, not too mention how much doo-doo you and the customer would
be in if you have any FXO disconnect supervision problems.

 

My 2 cents

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, May 25, 2007 2:38 PM
To: zohaib shabir; Craig Staffin
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway

 

Ask the client what their goals are. Work from there. You can do quite a
bit with PRI configuration.

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."
WJR

	----- Original Message ----- 

	From: zohaib shabir <mailto:zohaibshabir at gmail.com>  

	To: Craig Staffin <mailto:craig at staffin.org>  

	Cc: Lelio Fulgenzi <mailto:lelio at uoguelph.ca>  ;
cisco-voip-request at puck.nether.net ; cisco-voip at puck.nether.net 

	Sent: Friday, May 25, 2007 1:50 PM

	Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway

	 

	Well actually my client does not want the PRI lines he wants FXO
ports so that he gets 60 lines independent of each other.

	On 5/25/07, Craig Staffin < craig at staffin.org> wrote: 

	why would anyone need that many FXO ports.  If thats the case
you should be looing at some form of digital communication. 
	
	Craig 

	 

	On 5/25/07, zohaib shabir <zohaibshabir at gmail.com> wrote: 

	Thanks for the reply,
	Problem for me is my client wants 60 FXO ports per router i
cannot do even through 3845. Please advise me which way to go 

	 

	On 5/25/07, Lelio Fulgenzi < lelio at uoguelph.ca> wrote: 

	sure, you can use the CMM modules with FXO or PRI ports.

	 

	take a serious look at comparing the cost of the blades with an
ISR though.

	 

	you'll be surprised as to how much cheaper it can be.

	 

	and you'll get to use the ISR for all sorts of other stuff like
SRST. granted you can use the CMM for SRST but it is limited in memory.

	 

	 

	
------------------------------------------------------------------------
--------
	Lelio Fulgenzi, B.A.
	Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1
	(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
	"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo
buffalo."      WJR

		----- Original Message ----- 

		From: zohaib shabir <mailto:zohaibshabir at gmail.com>  

		To: cisco-voip at puck.nether.net ;
cisco-voip-request at puck.nether.net 

		Sent: Friday, May 25, 2007 1:04 PM 

		Subject: [cisco-voip] Catalyst 6500 switch as Voice
Gateway

		 

		Dear All,
		Can we use Catalyst 6500 series switch as Voice gateway.
		
		-- 
		Regards,
		Zohaib Shabir
		Network Engineer(Voice and PreSales)
		DWP Group, TECH Division
		Ph:+92-302-8232689 

________________________________

		_______________________________________________
		cisco-voip mailing list
		cisco-voip at puck.nether.net
		https://puck.nether.net/mailman/listinfo/cisco-voip

	
	
	
	-- 
	Regards,
	Zohaib Shabir
	Network Engineer(Voice and PreSales)
	DWP Group, TECH Division
	Ph:+92-302-8232689 

	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net 
	https://puck.nether.net/mailman/listinfo/cisco-voip

	
	
	
	-- 
	
	

	Craig Staffin
	Craig at staffin.org
	(H) 262-437-7313 
	(C) 262-613-6003 

	
	
	
	-- 
	Regards,
	Zohaib Shabir
	Network Engineer(Voice and PreSales)
	DWP Group, TECH Division
	Ph:+92-302-8232689 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070525/54e8de80/attachment-0001.html