[cisco-voip] Catalyst 6500 switch as Voice Gateway

[Lelio Fulgenzi]

Ask the client what their goals are. Work from there. You can do quite a bit with PRI configuration.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

  ----- Original Message ----- 
  From: zohaib shabir 
  To: Craig Staffin 
  Cc: Lelio Fulgenzi ; cisco-voip-request at puck.nether.net ; cisco-voip at puck.nether.net 
  Sent: Friday, May 25, 2007 1:50 PM
  Subject: Re: [cisco-voip] Catalyst 6500 switch as Voice Gateway


  Well actually my client does not want the PRI lines he wants FXO ports so that he gets 60 lines independent of each other.


  On 5/25/07, Craig Staffin < craig at staffin.org> wrote:
    why would anyone need that many FXO ports.  If thats the case you should be looing at some form of digital communication. 

    Craig



    On 5/25/07, zohaib shabir <zohaibshabir at gmail.com> wrote:
      Thanks for the reply,
      Problem for me is my client wants 60 FXO ports per router i cannot do even through 3845. Please advise me which way to go



      On 5/25/07, Lelio Fulgenzi < lelio at uoguelph.ca> wrote:
        sure, you can use the CMM modules with FXO or PRI ports.

        take a serious look at comparing the cost of the blades with an ISR though.

        you'll be surprised as to how much cheaper it can be.

        and you'll get to use the ISR for all sorts of other stuff like SRST. granted you can use the CMM for SRST but it is limited in memory.


        --------------------------------------------------------------------------------
        Lelio Fulgenzi, B.A.
        Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
        (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
        "Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

          ----- Original Message ----- 
          From: zohaib shabir 
          To: cisco-voip at puck.nether.net ; cisco-voip-request at puck.nether.net 
          Sent: Friday, May 25, 2007 1:04 PM 
          Subject: [cisco-voip] Catalyst 6500 switch as Voice Gateway


          Dear All,
          Can we use Catalyst 6500 series switch as Voice gateway.

          -- 
          Regards,
          Zohaib Shabir
          Network Engineer(Voice and PreSales)
          DWP Group, TECH Division
          Ph:+92-302-8232689 


----------------------------------------------------------------------


          _______________________________________________
          cisco-voip mailing list
          cisco-voip at puck.nether.net
          https://puck.nether.net/mailman/listinfo/cisco-voip





      -- 
      Regards,
      Zohaib Shabir
      Network Engineer(Voice and PreSales)
      DWP Group, TECH Division
      Ph:+92-302-8232689 

      _______________________________________________
      cisco-voip mailing list
      cisco-voip at puck.nether.net 
      https://puck.nether.net/mailman/listinfo/cisco-voip





    -- 

    Craig Staffin
    Craig at staffin.org
    (H) 262-437-7313 
    (C) 262-613-6003 



  -- 
  Regards,
  Zohaib Shabir
  Network Engineer(Voice and PreSales)
  DWP Group, TECH Division
  Ph:+92-302-8232689 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070525/1e18e9e6/attachment.html