[cisco-voip] 7911 factory default reset

[Paul Choi]

Can your phone talk to the tftp server properly?


--- keli at carocomp.ro wrote:

> Hi!
> 
> I have a 7911G phone, with POE, that had problems
> starting up - got  
> stock in the DHCP phase. It seemd like bad cabling,
> but it behaved the  
> same plugged directly into the switch (Cisco POE
> switch).
> 
> So I tried a factory reset, but it won't recover.
> I'm not sure wether  
> I completed the procedure correctly though:
>   - reset the phone with the # pressed
>   - then press 123456789*#0 in sequence
> 
> The prone now enters the "Upgrading" phase, reboots,
> with a circle  
> icon (bullet?) in the lower left corner (where
> normally a checked  
> checkbox resides) then it begins the upgradeing
> proces all over again.
> 
> In the mean time, it recieves an IP adress from DHCP
> and can be pinged  
> for a shor while.
> 
> How do I exit this loop?
> 
> thanks,
>    Zoltan
> 



 
____________________________________________________________________________________
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html