[cisco-voip] QOS for MPLS

[Paul Choi]

He's talking about QoS for MPLS, not CAC.

--- "Clouse, Chris" <chris.clouse at berbee.com> wrote:

> Use CallManager locations to perform Call Admission
> Control.
> 
> Christopher Clouse, CCNP CCDP CCVP MCP Network+
> 
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Jonathan
> Charles
> Sent: Saturday, May 26, 2007 11:35 AM
> To: ciscovoip
> Subject: [cisco-voip] QOS for MPLS
> 
> I have always understood that QOS settings need to
> match on both ends
> of a circuit... so, if you allocate 800k on one
> side, you need to do
> the same on the other.
> 
> I am now working on an MPLS circuit that has DS3s on
> some sides, DS1s
> on others... do I still need to match QOS settings?
> 
> Customer wants 800k on the T1s and 2500k on the
> DS3s... I don't think
> it will matter as I am matching these bw limits on
> the locations...
> but how do I throttle calls from a DS3-side location
> to a DS1
> location?
> 
> For example... main site is in Chicago, they have a
> DS3, one remote
> site is in Wichita and has a T1... so, I put 800k
> for Wichita and
> 2500k for Chicago... what is to stop Chicago from
> flooding Wichita
> with 2.5MB of calls?
> 
> 
> 
> Jonathan




       
____________________________________________________________________________________Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online.
http://smallbusiness.yahoo.com/webhosting