[cisco-voip] PoE Phone Problem

[DUNCAN, W B.]

I probably should have elaborated more.  The trouble with both of these
phones seems to be the power module.  I plugged a new phone into where
the bad phone was removed and it works fine.  I took the bad phone to a
known good port it does not work.   I plug in a power brick it works.
The phones seem to not be able to sense PoE and I was hoping perhaps
someone else might have experienced this and have some solution.  My
assumption is that the phone is just no longer any good without a power
brick, but I thought I would ask.  

 

Thanks all,

W. Brian Duncan

Coordinator of Telecommunications

Ozarks Technical Community College

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of DUNCAN, W B.
Sent: Wednesday, May 30, 2007 3:03 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PoE Phone Problem

 

I have had two phones that wont power up with PoE.  I can plug these
into a power brick and they work fine.  Has anyone experienced this and
more so is there a way to repair the phone?

 

Thanks,

W. Brian Duncan

Coordinator of Telecommunications

Ozarks Technical Community College

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070531/693daabf/attachment.html