[cisco-voip] Error message on an NFAS gateway...

[Justin Steinberg]

I've had a similar problem with international dialing (and NFAS but I
don't think nfas mattered in my case..)

The isdn map command under the d channel fixed it for me.

interface Serial0/0/0:23
 isdn map address 011.* plan unknown type unknown


Justin


On 11/1/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> Actually, the codec was a different issue...
>
> The fix for this was changing the plan and type to National and ISDN on CCM...
>
> However, this made sure that international calls would fail... since
> the customer didn't care about them, neither did i.
>
>
>
> J
>
> On 10/31/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
> > why do you have 'numbering-type' under the POTS dial-peer?
> >
> >
> >
> > On 10/31/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > It is a 2811...
> > >
> > > Inbound works fine, outbound gets this message:
> > >
> > >
> > > Oct 31 20:43:20.352: %CALL_CONTROL-6-NUMBERING_TYPE_NO_MATCH: The
> > > called number numbering type did not matchThe event for the callid
> > > 1000 is being discarded.
> > >
> > > Here is dial-peer 1000
> > >
> > > dial-peer voice 1000 pots
> > >  numbering-type national
> > >  preference 1
> > >  destination-pattern 1[2-9]..[2-9]......
> > >  port 0/0/1:23
> > >  forward-digits 10
> > >
> > >
> > > Anyone know what the problem is?
> > >
> > >
> > >
> > > Jonathan
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>