[cisco-voip] Error message on an NFAS gateway...

[Jonathan Charles]

Actually, the codec was a different issue...

The fix for this was changing the plan and type to National and ISDN on CCM...

However, this made sure that international calls would fail... since
the customer didn't care about them, neither did i.



J

On 10/31/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
> why do you have 'numbering-type' under the POTS dial-peer?
>
>
>
> On 10/31/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > It is a 2811...
> >
> > Inbound works fine, outbound gets this message:
> >
> >
> > Oct 31 20:43:20.352: %CALL_CONTROL-6-NUMBERING_TYPE_NO_MATCH: The
> > called number numbering type did not matchThe event for the callid
> > 1000 is being discarded.
> >
> > Here is dial-peer 1000
> >
> > dial-peer voice 1000 pots
> >  numbering-type national
> >  preference 1
> >  destination-pattern 1[2-9]..[2-9]......
> >  port 0/0/1:23
> >  forward-digits 10
> >
> >
> > Anyone know what the problem is?
> >
> >
> >
> > Jonathan
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>