[cisco-voip] Error message on an NFAS gateway...

[Jonathan Charles]

Because it is a Megaco 4ess switch... and requires it.

Also, it turned out that the only way to hard code the codec is codec g711ulaw


J

On 10/31/07, Justin Steinberg <jsteinberg at gmail.com> wrote:
> why do you have 'numbering-type' under the POTS dial-peer?
>
>
>
> On 10/31/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > It is a 2811...
> >
> > Inbound works fine, outbound gets this message:
> >
> >
> > Oct 31 20:43:20.352: %CALL_CONTROL-6-NUMBERING_TYPE_NO_MATCH: The
> > called number numbering type did not matchThe event for the callid
> > 1000 is being discarded.
> >
> > Here is dial-peer 1000
> >
> > dial-peer voice 1000 pots
> >  numbering-type national
> >  preference 1
> >  destination-pattern 1[2-9]..[2-9]......
> >  port 0/0/1:23
> >  forward-digits 10
> >
> >
> > Anyone know what the problem is?
> >
> >
> >
> > Jonathan
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>