[cisco-voip] 7961 screens lock up with firmware load SCCP41.8-2-1S

[Robert]

On Thu, 2007-11-01 at 08:01 -0500, Nasses, Gus wrote:
> 99% of our 7961’s use phone load SCCP41.8-2-1S

100% of our 7961's use the same load. Of course, I only have 8 of them
deployed, but I have 22 more on the shelf.

The only strange symptom I've had so far happened only yesterday. One of
them could not see the Corporate Directory. Missed, Received and Placed
Calls directories displayed, but not Corporate. There was a 'requesting'
message on the display. In troubleshooting, I found that I could not hit
the web server in the device. I portscanned it and found that port 80
was not open. Web Access was enabled in the phone's configuration. To
our knowledge, nothing else was wrong at the time, but the user cold
booted the phone before I could do more troubleshooting and all was back
to normal when it came back up.

My partner admin and I have had our 7961's in service for a few months
without issue, but we're keeping our eyes on them since we're starting
to deploy them now.

Robert