[cisco-voip] CCM 6 IP address change

[Ryan Ratliff]

1.  Make sure you heed the warning in the 'set network ip eht0 <addr>
<mask>' command.

admin:set network ip eth0 14.4.4.4 255.255.255.0
          ***   W A R N I N G   ***
If there are IP addresses (not hostnames)

configured in Cisco Unified CM Administration

under System -> Servers

then you must change the IP address there BEFORE

changing it here or call processing will fail.

This will cause the system to restart

=======================================================
 Note: To recognize the new IP address all nodes within
       the cluster will have to be manually rebooted.
=======================================================

          Do you want to continue ?

Enter "yes" to continue and restart or any other key to abort

2. The CCMAdmin page is only available as a web page.  The console of your
CM 5/6 server is CLI only and thus no web page access is available.  

-Ryan 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ranjan Babu .G
Sent: Wednesday, October 31, 2007 5:29 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM 6 IP address change


Hi, 

I'm having a v6.0(1)on my lab in vmware  image.

1.The image having assigned ip .now I want to change the IP address .Any
impact on ip change.

2. How to access the CCMadminpage from CLI of  Linux box.

Thanks and Regards,
Ranjan 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip