[cisco-voip] voice service voip > modem passthru
Jason Aarons (US)
jason.aarons at us.didata.com
Mon Nov 5 08:44:13 EST 2007
My debug isdn q931 started showing me sending disconnections due to
'resources not available" when I call from my 7960 phone to PSTN. I
have a 2811 with 2 PRIs to PSTN and 300 7940 phones.
It started after I wanted to add 60 numbers on a Castelle Fax Press T1
PRI (MGCP). I added Route Patterns in CCMAdmin pointing to the Castelle
as these are mostly inbound faxes to the Castelle Fax Press.
I didn't want to add 60 individual dial peers, so I put it global. I
thought it listened to each call for fax/modem tones and didn't invoke
any modem passthrough resources unless needed. How many modem
passthroughs can a 2811 handle?
I understood since I have CCM/MGCP I must use modem passthrough versus
fax passthrough.
Voice service voip
Modem passthrough nsd codec g711ulaw
IOS 12.4.11T3 and CallManager 5.1.3-2000-2
Calls come in H323 Gateway to CallManager, then to Castelle Fax
PressMGCP gateway. I wanted to keep the Castelle Fax Press MGCP as the
administrator has no IOS experience.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071105/709f08a8/attachment.html
More information about the cisco-voip
mailing list