[cisco-voip] PRI Error

[Sechaba Mokoena]

Hi,

 

I'm having a problem with my PRI, each time a called is placed channel
30 is always selected. I have called the Telco to test the circuit, but
they claim the circuit is fine. Is there anything I can check whilst
debugging to prove that the root of this problem is not caused by my
equipment.

 

Best regards,

 

Sechaba Mokoena

Systems Engineer

Bytes Technology Group - Systems Integration


Tel : (+27) (11) 205-7000 |  Fax: (+27) (11) 205-7584  |  Cell : (+27)
84 798-6803 | msn:sechaba.mokoena at hotmail.com
Web  : www.btgroup.co.za  |  Press Office : www.itweb.co.za/office/bytes
<blocked::http://www.itweb.co.za/office/bytes>    |   Licensing :
www.purelicensing.co.za <blocked::http://www.purelicensing.co.za/>  

 

Bytes Systems Integration (Pty) Ltd : Registration No: 1995/012031/07
A subsidiary of Bytes Technology Group SA (Pty) Ltd,   In association
with KAGISO
P O Box 5905, Halfway House, 1685, Midrand;  Bytes Business Park, Block
B, 241 Third Road, Halfway Gardens, Midrand, South Africa 

E-Mail Disclaimer: http://www.altron.co.za/email.asp
<blocked::blocked::http://www.altron.co.za/email.asp>  or phone: (+27)
(11) 205-7000

 


The information contained in this message and or attachments is intended
only for the person or entity to which it is addressed and may contain
confidential and/or privileged material.  Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient
is prohibited. If you received this in error, please contact the sender and
delete the material from any system and destroy any copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20071105/293b485e/attachment.html